emtelle logo EN

Telekommunikation Zubehör

Wir liefern Ihnen eine ausgereifte Produktpalette an Zubehör in unterschiedlichsten Größen, um alle Anforderungen zu erfüllen.

Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP68).
  • Ring Seal SLIP couplers (IP68).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.
Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP68).
  • Ring Seal SLIP couplers (IP68).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.
Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP68).
  • Ring Seal SLIP couplers (IP68).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.
Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP68).
  • Ring Seal SLIP couplers (IP68).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP68).
  • Ring Seal SLIP couplers (IP68).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.
Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP68).
  • Ring Seal SLIP couplers (IP68).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.
Product overview image

Split Duct Repair (Power)

  • Repair damaged uPVC Power duct systems with cables already installed in the system.
  • Size range is 110mm to 250mm OD.
  • Split duct kit includes: 2 x 3m uPVC split halves, with H strips and 3 x nylon cable straps.
  • Split coupler kit icludes2 x split couplers & 4 nylon cable straps.
Product overview image

Warning Tape

  • Placed in trench above buried duct networks.
  • Designed to provide a visual warning that power cables are present if digging takes place.
  • Fully compliant with ENA-TS-12-23.
  • Available with DNO specific print details and warnings.
Product overview image

Protection Tape

  • Designed to provide a protective layer for underground ducted networks.
  • Fully compliant with ENA-TS-12-23.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Supplied on rolls.
Product overview image

Protection Tiles

  • A heavy-duty protective board, designed to provide a protective layer for underground ducted networks.
  • Fully complies with ENA-TS-12-23 available in Class 1 or Class 2 specification.
  • Manufactured from recycled PE compound.
  • Available with DNO specific print details & warnings.
  • Lateral movement prevented by inserting pegs within the holes at either end.
Product overview image

Hockey Sticks

  • Duct bend used to connect electric meters with underground services.
  • 2 - piece product with a coloured 90deg bend attached.
  • Provides extra mechanical protection for electrical cable.
Product overview image

Transition Couplers

  • Provide a means to connect the plain ends of two ducts with different diameters.
  • Designed to provide a smooth internal transition between joining ducts.
  • Manufactured from a solid wall HDPE pipe.
  • Both ends contain a ring seal – air tight/sealed connection.
  • Black as standard, Red available.
Product overview image

Couplers

  • Connector Sleeves (IP4X).
  • Ring Seal STOP couplers (IP57).
  • Ring Seal SLIP couplers (IP57).
  • Expansion couplers.
  • Transition couplers.
  • Conductive couplers.
Product overview image

Bends

  • Available with IF or IRS sockets.
  • 11.25, 22.5, 45 & 90deg available as standard.
  • 3.9m Radius available to suit HV cable bending radius .
  • 1.2m Radius available to suit LV cable bending radius.
  • Bespoke bends are available on request.
Product overview image

Brushes

  • Used to clean the duct ID prior to duct proving.
  • Alternative cleaning product to the foam pigs.
Product overview image

Mandrels

  • Used for duct proving prior to installing cable.
  • Typically <10% of duct ID.
  • Towing eyes pre-installed.
Product overview image

Foam Pigs

  • Used to clean/dry the inside of a duct prior to pulling through cable.
  • Available with rope pre-installed for pulling.
  • Also available in medium density – suitable for blowing (Maintains shape under compressor pressure).
  • Typically followed by a mandrel to prove the duct.
Product overview image

Expanding Plugs

  • Prevents the ingress of debris and water after duct installation.
  • Cap can be removed to allow access to threaded shaft to accept rope blowing gun.
  • Available to suit all sizes of Emtelle duct.
  • Heavy duct steel and rubber construction.
Product overview image

End Caps

  • Prevents the ingress of debris and water prior to duct installation.
  • Available in bags or pre-installed on duct.
  • Easy to install interference fitment.
Product overview image

Pressure Seals / Building Entry Seals

  • Used to seal cable within duct.
  • Suitable for building entry applications.
  • Gas and watertight sealing solution available in a range of sizes to suit Emtelle duct.
  • Expanding design to ensure a secure fit.
  • Bespoke configurations available to suit a wide range of cable diameters and quantities.
  • High quality 304 stainless steel and EDPM rubber.
Product overview image

Cable Lubricants

  • Use to repair damaged sections of telecoms duct.
  • Size range of 96.5mm and 110mm.
  • Tongue and groove split design sections.
  • Available in Green, White, Grey & Orange.
Product overview image

Spacers

  • Organise multiple ducts in a trench.
  • Ensures uniform installation.
  • Unique click designs, extra sections can easily be added.

Abonnieren Sie unseren Newsletter